Dollie / Crane

Don’t forget to check out our track options here too.

DOORWAY DOLLYDOORWAY
DOLLY TRACK WHEEL SET (HOT BUTTONS)
SKATEBOARD DOLLY W/ TRACK WHEELS
UNIVERSAL SPEED WHEELS
UNIVERSAL TRACKING WHEELS
WESTERN DOLLY
JUMBO DOLLY
CHAPMAN LEONARD FAMILY OF DOLLIES AND CRANES
JIMMY JIB III

THE PEEWEE III Plus

  • SUPER PEEWEE  III+ Incorporates a New Improved Universal Head with Convenient 4-Way Levelling
  • Universal Head Has a Built-In Rotating Offset with Lock Off Points Every 15 Degrees
  • Universal Head Has a Variable Head Mount, with Four Positions for Quick Placement of the Camera at Different Heights
  • SUPER PEEWEE III+ Incorporates Brakes on Rear Wheels
  • SUPER PEEWEE III+ Is Nickel Plated for Less Maintenance
  • SUPER PEEWEE III+ Incorporates the Universal Stop Valve System
  • Variable Chassis Leg Adjustment Cam-Lock Chassis
  • Hardened Stainless Steel Bushings
  • Works on Both Straight and Curved Tubular Track
  • Compact and Lightweight for Travel and Storage
  • Variety of Tires Available
  • Rear Controlled Steering
  • Vertical Arm Travel
  • Corrected Steering Geometry
  • Auxiliary Air Tank
  • Enclosed King Pin System
  • Electric Pump System
  • Many Accessories Available 

** Also available are other models of the PeeWee

Made in America: Making of the Chapman PeeWee Camera Dolly

 

The PORTA JIB by Losmandy
Reach 57″ (145cm) – Boom 72″ (183cm)
Wt. 60 lbs. (27kg) 
Designed to carry up to 100 lbs. (45kg) of camera and fluid head weight, this is the most versatile of all lightweight jibs.
Assembles in less than 5 minutes. No tools required. All parts are machined aluminum and stainless steel. Boom and pan lock included.
36″ EXTENSION KIT
– Increases Reach to 92″ (234cm)

– Increases Boom to 131″ (333cm)
– Note: Recommended weight capacity: 45 lbs. (20kg.)
– Extra counter weights will be needed.
It takes 30 lbs. to balance the extended front, and the camera/fluid head needs 2.2X weight to balance.

The Piccolo
Egripment’s Piccolo is a compact, nimble, easy to operate crane ensuring absolute stability on all terrains or in a small room.  It is manufactured from aerospace duraluminium, but its uniqueness lies in the fact that the crane arm folds down with the column onto the dolly base. This is achieved using a Hydraulic Assist System. Due to this “H.A.S.”, the complete crane can be set up in less then 3 minutes and makes the Picollo the ultimate in crane technology for quick and easy transportation. With the Pi
collo, the adjustment from the minimum low to the maximum height can be made in one movement, without the need for separate platform brackets.
The crane arm is delivered complete with a seat system, stabilizing bars, fine adjustment weight and a counterweight bucket with a locking device.

The Egripment’s Piccolo crane is especially designed to offer the benefits of a rideable crane in smaller studios, or on location. With a platform that can carry up to 250 kg. (550 Lbs.) (2 persons, plus camera and seat support,) the Piccolo crane offers a crane movement from 20 cm to 310 cm high. Because the Piccolo is folded onto its own dolly, it is extremely handy and portable for transportation. The dolly is equipped with hard rubber wheels and track wheels. The Piccolo is rentable with or without operators.

View Instruction Manual PDF.

Instructional Video on how to Assemble the Piccolo Crane

 

THE SWISS-JIB
Constructed entirely of Carbon Fibre and Aluminum, the SWISS-JIB is a lightweight, portable remote head crane designed for set up by two people in under fifteen minutes. Its modular design allows length from a minimum reach of 9′ to a maximum of 42′, yet its simplified design and fast locking systems make this crane easy to assemble.
Length changes are a snap and this save your production
both time and money. Invented by a cinematographer, it is ideally suited for both motion picture and video cameras.
Its Carbon Fibre sections make it easy to transport and set up while combining maximum stiffness with minimum weight, thereby diminishing momentum when the arm is set in motion. This makes for easier stops and starts, giving you more fluid, steadier shots.
The levelling rods are built onto each arm segments giving the SWISS-JIB the smallest profile of any remote head crane.
Swiss engineering has truly produced the best remote head crane in the business.

View Instruction Manual PDF.

Version 6
Lens height
Oversling:
Undersling:
Lrnght pivot-lens:
Maximum load:
With barcing kit:
 
36’5″
31’5″
41’5″
N/A
55lbs

 

OVERKEEPER / SLIDER

Available in 24″, 36″ and 48″ configurations
Available with Mitchell Base

Wally PipeDolly Kit

 
Adaptable to run on pipe or track
-Set up on table top or set it up on legs to get the perfect shot
-Multiple pipe lengths available 2′ – 20′
-Available with Mitchell base and option to add bowl mount configurations

Mini-Mike Dolly

 
Adaptable to run on track or pipe
Set your tripod and away you go

Follow Us on Social Media for the Latest News